Seamless Stainless Steel Tubes Manufacturers in India, Seamless Stainless Steel Tubing Manufacturers in India, 304 Stainless Steel Seamless Tubing, 316L Stainless Steel Seamless Tubing, 304 Stainless Steel Seamless Tubes, 316L Stainless Steel Seamless Tubes, Seamless Stainless Steel Tubing Suppliers
High quality Stainless Steel Seamless Tube, check Stainless Steel Seamless Tubing latest price list of 2017. Metric Stainless Steel Seamless Tubing, Stainless Steel Seamless Tubing Suppliers, Stainless Steel 304 Seamless Tubing, Stainless Steel 316L Seamless Tubing
Looking For SS Seamless Tubing With Customized Length? Our Standard Sizes Are Usually 3m And 6m In Length, But We Also Provide Additional Cutting Service. Seamless Stainless Steel Tubes Distributors, 304 Seamless Stainless Steel Tubes Stockholders, 316L Seamless Stainless Steel Tubes Wholesalers, Seamless SS Tubes Dealers, 304 Seamless Stainless Steel Tubing Stockists, 316L Seamless Stainless Steel Tubing Exporters, 304 Seamless SS Tubing Importers, 304 Seamless Tubing Retailers
DM Special Steel Ltd is India's largest independent multi-metals pipe & tube supplier & stockholder. Our range covers seamless stainless steel tubing, mild steel, stainless steel, cold drawn, structural, tubular, galvanized tubes, pipe, black pipe, and welded tube and pipe.
Widely regarded as being the leading supplier of seamless stainless steel tubing in India, DM Special Steel Ltd is the preferred choice for seamless stainless steel tubing in India, South & west Africa & Gulf countries.
Are you looking for stock of seamless stainless steel tubing ?
DM Special Steel Ltd is now offering seamless stainless steel tubing largest stock in Mumbai, India
DM Special Steel Ltd is a India based Stockholder of Pipe, Tube & Tubing of multiple Origins – Our stock Materials are from China, India, Malaysia and Western European Origins.
seamless stainless steel tubing
Stainless Steel Coil Tubing Specification
Outer Diameter : 1/16” through 3/4"
Thickness : . 010" through .083”
Stainless Steel Seamleseamless stainless steel tubing Specifications : ASTM A213 (average wall) and ASTM A269
Stainless Steel Welded Coil Tubing Specifications : ASTM A249 and ASTM A269
The main processes we use when manufacturing seamless tubes are tube reduction (or pilgering) and cold drawing.
Other important processes in between or after the drawing process are:
- Degreasing / cleaning
- Cutting to length / deburring
- NDT testing
SEAMLESS TUBE PRODUCTION METHODS
At DM Special Steel Ltd we use multiple combinations of different processes to manufacture high quality seamless tubing to the exact specifications needed by each of our customers. The tubes can be created in a variety of different sizes and shapes using a whole range of alloys. Here are descriptions of the methods we employ.
Tube reduction - pilgering
Also known as cold pilgering or tube rocking, this process reduces the size of a metal tube across three dimensions: outside diameter, internal diameter and wall thickness. A typical first reduction elongates the tube by factors of greater than 8.
Our cold pilger tooling is designed in house and involves very complex geometry. This is tested using Finite Element Analysis (FEA) - an accurate and flexible technique to predict the performance of a structure, mechanism or process - to improve the efficiency of the design and quality of tubing produced.
This is the second level of cold working tubes to reduce their size. Here the tube is pulled through a die which is smaller than the tube, so the end of each tube needs to be machined in order to fit. It will be ‘swaged’ or ‘tagged’ before drawing. Following this procedure, the tube end can pass through the die and is clamped to a drawing trolley, also called a pulley, which draws the tube through the die.
The machine used for this process is called a draw bench, and DM Special Steel Ltd has them in various sizes. A smaller one is used each time the tube is reduced. They are equipped with different tools so they can perform different types of cold drawing such as:
This is the simplest drawing procedure. The tube is drawn through a hardened die made of polished tool steel or, for smaller sizes, an industrial diamond. With the correct lubrication, when the tube surface comes into contact with the polished die surface it is worked smooth. The inside bore surface is not constrained so the wall thickness of the tube will always increase when it’s drawn. Large cross sectional area reductions can be performed using this technique.
Rod drawing is one of the main intermediate drawing stages. The outside diameter and wall thickness are reduced at the same time.
The tube is loaded over a hardened steel mandrel rod and both are then drawn through a die. This squeezes the tube onto the rod and reduces the wall thickness. The die and mandrel determine the size of the drawn tube which is then slightly expanded using pressure rollers so that the rod can be removed. Rod draws are used as intermediate stages to reduce tube sizes prior to the final drawing cycle.
This is the type of drawing used for the highest quality output. The outside and inside diameters of the tube are worked at the same time. A plug made of high grade tool steel with a polished surface is located precisely in the middle of the outside diameter drawing die. The tube is loaded over the plug attached to a fixed rod. As the tube is drawn through the die the burnishing action of the metal flowing over the stationary plug imparts a high tolerance surface finish inside the tube.
When properly lubricated and prepared the ID will show very few defects and finishes of 0.20microns Ra are achieved. Therefore, plug drawing is chosen to significantly improve the ID surface condition.
We have developed specialist procedures to manufacture tubes with the highest quality ID surface finishes, and these are used specifically on our semiconductor, medical and aerospace products. Improved ID surfaces have several potential advantages from limited contamination and high cleanliness to improved high pressure performance, increasing the fatigue life of the tube.
For both welded and seamless products, tubing can be drawn to almost any profile. For further details please see our page on Tube shapes and profiles
Degreasing - cleaning
We have recently switched to using non-VOC solvent in our tube degreasing and cleaning facilities.
European Union environmental directives have meant that the trichloroethylene-based solvent used to degrease metal tubing products has not been available since December 2010. Working with specialist chemists and university labs, DM Special Steel Ltd has developed a degreasing process using a non-volatile, biodegradable solvent for degreasing which doesn’t harm the environment. We now use this solution across all market sectors and tests have proven it to be as good as, if not better than, trichloroethylene processes. It has a lower energy footprint as well.
This represents a major step forward in the DM Special Steel Ltd environmental policy.
The annealing process homogenises the metallurgical microstructure of the tube. As the grain structure of the tube after drawing is stressed, the material becomes hard and brittle. To be able to draw the tube again, the stress needs to be removed to return the material to its normal state.
During annealing, the tubes are exposed to a controlled temperature (up to 1200°C) and soak time. Through this process the tube remains in shape, but the grains in the structure of the tube reform into a regular unstressed pattern. The annealed tube is then softer and can be redrawn.
For high pressure tubes final heat treatment is not required. This leaves the material in a hard drawn condition enhancing the mechanical properties of the tube. DM Special Steel Ltd uses a variety of furnaces for the annealing process, such as hydrogen furnaces for bright annealing, vacuum furnaces, gas furnaces, coil furnaces and inline annealer.
We have Nadcap accreditation for heat treatment to specification AMS 2750.
NDT testing and inspection
At DM Special Steel Ltd we inspect all tubes before shipment to ensure that all elements of the customer’s specifications have been met. Standard inspections include:
- Positive material identification (PMI)
- Visual inspection
- Dimensional inspection
- Laser micrometer inspection
Our laboratory tests the mechanical properties of tube samples and carries out chemical analysis and surface checks. The results are then recorded in test certificates.
Depending on the complexity of the specification, further tests can be applied which can be grouped into destructive and non-destructive testing (NDT) methods.
This includes tensile, hardness, bending, flattening, flare and metallurgical tests. These tests are executed on samples from each tube batch.
Non-destructive testing (NDT)
We use eddy current testing and ultrasonic testing. DM Special Steel Ltd also performs pressure testing in oil or water up to a maximum of 2000bar (28,800psi) for coils and a maximum of 1600bar (23,200psi) for straight lengths, or air under water tests where tube coils are submerged in a water tank and tested up to 207bar (3,000psi). Radiographic (X-ray) and magnetic permeability testing are also used.
Both polishing and centerless grinding are carried out only if the specification requires it. Polishing is an aesthetic consideration to improve the surface finish of either welded or seamless products. Centreless grinding is a high precision process to remove material from the OD of seamless tubes only. In addition to bringing the tube to the correct OD dimension, it also results in a surface finish of extremely high quality.
This electro-chemical process is used to further refine the ID surface smoothness of straight lengths of tube. It achieves achieve a surface roughness of just 0.1 microns (4 μ inch) Ra.
All products are printed with information relevant to the job such as heat number, dimensions, material and part number. This is printed along the length of all products dispatched, both seamless and welded.
Seamless straight lengths of tubing are individually sleeved by hand to ensure the highest quality is maintained and no damage occurs in the final stages of manufacture. Our precision tubes are either packed in wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases, standard cardboard boxes or tubes, ready for dispatch. Welded material is mainly coiled on wooden or steel drums of various dimensions before being covered with Lamiflex and moved ready for shipping. We can also pack tubes with ID or OD end caps if required.
DM Special Steel Ltd can arrange shipment and delivery of your tubes to your doorstep including special deliveries. We currently export to over 35 countries all over the world and use the Incoterms® as our international framework for shipping.
Check Our Heavy Sale Products :
|Other types of Stainless Steel Pipe, Stainless Steel Tube, Stainless Steel Tubing|
Other Stainless Steel Pipe, Tube, Tubing Grades
|Other SS Pipe grades|
Packaging & Shipping
Utmost care is taken towards Packing of the finished products so as to ensure that the resultant Coils, Foils, Tubes ,Pipes and Fittings reach in the same condition as desired by our valued customers.
Packing specifications for various products are:
- Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
- S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
- Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
- Coils and Foils are packed in wooden crates.
Packed seamless stainless steel tubing
Packed seamless stainless steel tubing
Other Packaging information:
- Bundle Packing
- Bundle Packing
- Wooden Case
- Wooden Case
- Wooden Case for U Tubes
- Reinforced by angle bar
- Stainless Steel Seamless Pipes & Tubes Manufacturer since 1996
- The annual capacity of the plant equals about 12.000 tons
- Specialized in Pipes & Tubes, Stainless Steel Pipe & Carbon Steel Pipe
- We export seamless tubes / welded tubes everywhere in the world
- We have our own warehouse of 10,000 feet, so we can offer best price in the market
- Supplier and trader of IBR Materials like IBR approved Pipes, IBR Certified Tubes
- Pipes up to 24" made in continuous production from coil
- Pipes up to 80" made from single plates
- Maximum thickness 40 mm
- Contacts with major mills & stockists around the world.
- Can offer ex-stock materials as well as mill delivery with nominal margins.
- Complete in-house testing facilities viz. hydro, eddy current, UT, chemical analysis,
- physical/mechanical, PMI, microscopic examination, etc…
- Prime and genuine materials with co-relating original test certificates.
Cities We Deliver To :
Abu Dhabi(United Arab Emirates)
Rio de Janeiro(Brazil)
Al Khobar(Saudi Arabia)
New York(United States)
Coimbatore (Tamil Nadu)
Port-of-Spain(Trinidad and Tobago)
Al Jubail(Saudi Arabia)
Ho Chi Minh City(Vietnam)
Countries We Deliver To :
Available Stock at DM Special Steel Ltd
Pipes & Tubes Stock At a Glance:-
Pipe Gradewise Stock At a Glance:-
Tube Gradewise Stock At a Glance:-
Nickel Alloys Pipes & Tubes Stock At a Glance:-
Top Sellers Pipes & Tubes At a Glance:-
List of Countries where DM Special Steel Ltd supply Pipes & Tubes:-
List of Countries where DM Special Steel Ltd supply Pipes / Tubes :-